Elation Enode 8 Pro Artnet Interface

Elation Enode 8 Pro Artnet Interface

The eNode 8 PRO is an Ethernet node that serves eight DMX512 outlets, compatible with the Artnet and sACN protocols. All 8 outlets conform to DMX512-A and can be used as input or output. The two Ethernet links on the front are 10/100BaseTX connections on Neutrik RJ45 Ethercon connectors. The eNode8 embeds a built-in switch fabric which allows you to use the converter as an Ethernet repeater. All configuration are done through the on-board display and push dial.

Connections: 2 x 10/100BaseTX Ethernet connections on shielded Neutrik RJ45 Ethercon connectors and 8 x DMX512-A in/outputs on shielded and isolated gold plated 5 pin female XLR, with termination (DMX512-A)


  • DMX routing, universe setting, Input and output enable / disable
  • DMX output frame rate setting
  • Supported protocols: DMX, DMX512-A, RDM, Art-Net™, sACN
  • Protocol selection per port
  • IP settings
  • Unit ID and labeling
  • Ethernet activity indication on front panel
  • Multi language support
  • Built-in DMX soft-patch
  • Length: 482mm
  • Width: 160mm
  • Vertical Height: 44mm
  • Weight: 2.1kg
  • AC 100-240V – 50/60Hz
  • 7W Max Power Consumption

If you have a project you need assistance with, check out our galleries and don't hesitate to get in touch. We are always happy to answer your questions.